更新程序包并安装变异依赖环境
sudo apt update && sudo apt upgrade sudo apt install wget build-essential libncursesw5-dev libssl-dev libsqlite3-dev tk-dev libgdbm-dev libc6-dev libbz2-dev libffi-dev zlib1g-dev
开始正式安装
1.下载Python源码包
可以前往Python官网获取最新源码
cd ~ wget https://www.python.org/ftp/python/3.13.0/Python-3.13.0.tgz
2.解压Python源码
将下载好的源码包进行解压，默认放在当前文件夹下的压缩包同名文件夹内
tar xzf Python-3.13.0.tgz
3.编译Python源码
进入解压后的文件夹内，进行选项配置
cd Python-3.13.0 ./configure --enable-optimizations #--enable-optimizations为优化性能选项，其余类似的还有 --prefix=PATH 指定安装目录……，可根据需要进行选择。 #默认安装路径为 /usr/local/bin
4.安装Python 3.13
make altinstall #altinstall用于防止编译器覆盖默认Python版本
5.验证安装
root@debian:~ # python3.10 Python 3.10.0 (default, Dec 5 2021, 22:46:09) [GCC 10.2.1 20210110] on linux Type "help", "copyright", "credits" or "license" for more information. >>>
至此，已完成Python3.13的安装
接下来可以根据需要选择是否需要更改默认Python为Python3.13
切换Python版本
可以使用以下两个命令 whereis或which 确定已安装python的版本和路径：
#whereis：适用于查看目前已安装的所有Python版本及路径 root@debian:~ # whereis python python: /usr/bin/python3.9 /usr/lib/python2.7 /usr/lib/python3.9 /etc/python3.9 /usr/local/bin/python3.13 /usr/local/bin/python3.13-config /usr/local/lib/python3.13 /usr/local/lib/python3.9
#which：适用于查看具体某个python版本的安装路径 root@debian:~ # which python3.13 /usr/local/bin/python3.13
为单个用户切换Python版本
只需要在该用户home目录下的 .bashrc 文件下新增 Alias 即可
alias python='/usr/local/bin/python3.10' #python具体版本和路径可根据个人需要确定
修改完毕后，使用source ~/.bashrc命令，重新加载 .bashrc 文件，使其生效
系统级切换Python版本
使用update-alternatives –list python命令，为整个系统更改Python版本
1.列出所有可用Python替代版本
root@debian:~ # update-alternatives --list python /usr/lib/python2.7 /usr/lib/python3.9 /usr/local/bin/python3.13
2.添加替代版本列表
如果运行后出现错误信息：update-alternatives: error:no alternatives for python则为没有更新替代版本列表，使用以下命令添加：
#注意：update-alternatives --install #1.一般情况下，直接使用 /usr/bin/python 即可 #2.即为需要更换的python #3.为需要添加的python版本的安装路径，可以在上文中确定 #4.为优先级。数字越大，优先级越高 root@debian:~ # update-alternatives --install /usr/bin/python python /usr/lib/python2.7 1 #update-alternatives: using /usr/lib/python2.7 to provide /usr/bin/python (python) in auto mode root@debian:~ # update-alternatives --install /usr/bin/python python /usr/lib/python3.9 2 #update-alternatives: using /usr/lib/python3.9 to provide /usr/bin/python (python) in auto mode root@debian:~ # update-alternatives --install /usr/bin/python python /usr/local/bin/python3.13 3 update-alternatives: using /usr/local/bin/python3.13 to provide /usr/bin/python (python) in auto mode
至此，系统已默认Python版本为3.13，验证如下：
root@debian:~ # python Python 3.13.0 (main, Oct 16 2024, 21:16:02) [GCC 10.2.1 20210110] on linux Type "help", "copyright", "credits" or "license" for more information. >>>
3.进行版本切换
使用update-alternatives –config python命令即可
root@raspberrypi:~ # update-alternatives --config python There are 3 choices for the alternative python (providing /usr/bin/python). Selection Path Priority Status ------------------------------------------------------------ * 0 /usr/local/bin/python3.13 3 auto mode 1 /usr/lib/python2.7 1 manual mode 2 /usr/lib/python3.9 2 manual mode 3 /usr/local/bin/python3.13 3 manual mode Press to keep the current choice[*], or type selection number: 2 update-alternatives: using /usr/lib/python3.9 to provide /usr/bin/python (python) in manual mode root@raspberrypi:~ # python Python 3.9.2 (main, Oct 16 2024, 21:18:34) [GCC 10.2.1 20210110] on linux Type "help", "copyright", "credits" or "license" for more information. >>>
扩展：创建python虚拟环境
python3 -m venv myenv #创建虚拟环境 source myenv/bin/activate #进入虚拟环境
